| Model | SE2-K25 | |
| Output type | NPN | |
| Type | MINI type-Lead wire type | |
| Detection distance | 5 mm (Through-beam slot) | |
| Minimum detection object | Opaque objects larger than 0.8x1.2 mm | |
| Hysteresis | <0.05 mm | |
| Repeatability | <0.01 mm | |
| Power voltage | 5 to 24 VDC±10% Pulse P-P ≤10% | |
| Current consumption | < 15 mA | |
| Output action | NO+NC | |
| Control output | Maximum input current: 50 mA | |
| Applied voltage: ≤24 VDC (between output and 0 V) | ||
| Residual voltage: ≤2 V (input current 50 mA) | ||
| ≤1 V (input current 16 mA) | ||
| Loop protection | Power reverse connection, output reverse connection, short-circuit protection | |
| Response time | Upon light reception: 20 μs or less, Upon light shading: 80 μs or less (Maximum response frequency: 3 kHz)*2 | |
| Indicator | Orange LED | |
| Contamination degree | 3 | |
| Protection class | IP64 (IEC) | |
| Ambient temperature*3*4 | Operating: -25 to +55 °C; Storage: -30 to +80 °C (No condensation, no icing) | |
| Ambient humidity | Operating: 5 to 85% RH; Storage: 5 to 95% RH | |
| Ambient illumination | Sunlight: 10,000 lux; Incandescent lamp: 3,000 lux | |
| Withstanding voltage | AC 1000 V 1 minute Between all power supply terminals and the housing | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Shock resistance | 500 m/s², 3 times in each of the X, Y, and Z directions | |
| Insulation resistance | All power connection terminals to housing: 20 MΩ or higher, measured with a high-resistance meter at DC 250 V | |
| Light source | Infrared LED (transmitted peak wavelength: 940 nm) | |
| Material | Housing: PBT; Lens: PC | |
| Connection cable | Standard 2 m cable (0.1 mm² 4-core) *5 | |
| Weight | Approx. 26.6 g | |
| *1: When not specified, measurement conditions are ambient temperature +23°C *2: Response frequency measurement refers to the value when the disk rotates as shown in the right diagram. *3: When operating at ambient temperatures above +50°C, the sensor must be mounted on a metal unit. *4: Flexible cables lose flexibility when ambient temperatures fall below -10°C. *5: When extending the cable beyond 20 m, ensure the supply voltage at the sensor end remains above 4.5 V. |  | |
Quick Helpline
Copyright © 2021 Shenzhen SENPUM Electric Co., Ltd. All Rights Reserved
Room 2905, Building A, Yangguang Kechuang Center, Nanxin Road, Nanshan District, Shenzhen, Guangdong, China
Download Catalogue
Technical Specifications
Download
GD ICP No. 16120534-2
GD GongAn Beian No. 44030502001756
Delete all items