| Model | SA-T1390-8-03-P |
| Optical axis spacing | 8 mm |
| Detection distance | 0 to 3 m |
| Detection height | 1352 mm |
| Effective aperture angle (EAA) | Meets the requirements of IEC 61496-2, EAA＜2.5° when the detection distance is more than 3 m |
| Light source | Infrared LED (wavelength 850 nm) |
| Ambient temperature | Operation: -10 to +55 °C (no frost and condensation); Storage: -40 to +70 °C |
| Ambient humidity | Operation: 35 to 85 % RH; Storage: 35 to 95 % RH |
| Light interference resistance | Incandescent light: 3,000 lux; Fluorescent light: 3,000 lux; Sunlight: 10,000 lux |
| Homologous optical interference | Interfering light from emitting elements of the same design will not cause dangerous failures of the safety light curtain. |
| Protection class | IP65/IP67 |
| Vibration resistance | 10 to 55 Hz, Amplitude 0.35±0.05 mm, 20 times in each of the X, Y, and Z directions |
| Shock resistance | Acceleration 10 g, pulse duration 16 ms, 1000 times in each of the X, Y, and Z directions |
| Sensor size | A x 33 x 28 mm (A is transmitter/receiver length) |
| Material | Enclosure: rigid aluminum alloy; End cap: reinforced nylon; Optical cover: polycarbonate; Transmission line: RVVP |
| Power voltage | 24 VDC ±20 % (Ripple ±5 %) |
| Current consumption (without load) | Transmitter: <200 mA; Receiver: <200 mA |
| Scan time | 8 to 34 ms |
| Synchronization method | Wire synchronization |
| Output (OUT) | PNP transistor output × 2; ON state, load current ≤ 300 mA, output voltage ≥ Vcc-2 V; OFF state, leakage current ≤ 1 mA, residual voltage ≤ 1 V (excluding the effect of wire extension) |
| NPN transistor output × 2; ON state, load current ≤ 300 mA, output voltage ≤ 2 V; OFF state, leakage current ≤ 1 mA, residual voltage ≤ 2 V (excluding the effect of wire extension) | |
| Start-up time | ＜2 s |
| Detection function | Power-on self-test, real-time self-test during work. |
| Protection circuit | Over-voltage and over-current protection, output short circuit protection |
| Transistor output function | OUT1 Light beam all through light output ON, otherwise output OFF |
| OUT2 Light beam all blackout output ON, otherwise output OFF | |
| Configuration baud rate | Configure the baud rate, including 9600,19200, 38400, 57600, 115200 |
Quick Helpline
Copyright © 2021 Shenzhen SENPUM Electric Co., Ltd. All Rights Reserved
Room 2905, Building A, Yangguang Kechuang Center, Nanxin Road, Nanshan District, Shenzhen, Guangdong, China
Download Catalogue
Technical Specifications
Download
GD ICP No. 16120534-2
GD GongAn Beian No. 44030502001756
Delete all items