| Model | OW-PN2 |
| Standard | IIEEE802.3u (100BASE-TX) |
| Transmission speed | 100 Mbps (100BASE-TX) |
| Transmission medium | STP or Category 5+ UTP cable |
| Distance between nodes | 100 m |
| Communication port | RJ-45×1 |
| Supported Functions | Cyclic communication (data I/O communication) |
| Update Time | 2 to 512 ms |
| GSDML Version | V2.3 |
| Protocol | LLDP, DCP |
| Connectable devices/units | 16 units |
| | SF: (red lamp) On - system fault detected; Off - no PROFINET faults |
| | RDY: (green) On - communication function is ready; Off: module function is abnormal |
| Indicator light | D-bus: (green light) On - module communication is normal, blinking - module communication is abnormal |
| | BF: (Red) Blinking - abnormal bus communication; Off - normal bus communication |
| | Link/Activity Indicator |
| Supply Voltage | 24VDC including 10% ripple (p-p) powered by controller |
| Power consumption (communication module body) | 1200mW or less (50mA or less at 24V) |
| Ambient temperature | -20 to +55°C (no freezing) |
| Relative temperature | 35 to 85% RH (non-condensing) |
| Vibration resistance | 10 to 55 Hz Bidirectional amplitude 1.5 mm 2 hours in each direction X, Y, Z |
| Material | Polycarbonate |
| Weight | 45g |
Quick Helpline
Copyright © 2021 Shenzhen SENPUM Electric Co., Ltd. All Rights Reserved
Room 2905, Building A, Yangguang Kechuang Center, Nanxin Road, Nanshan District, Shenzhen, Guangdong, China
Download Catalogue
Technical Specifications
Download
GD ICP No. 16120534-2
GD GongAn Beian No. 44030502001756
Delete all items