Model | LU-N12 | |||
Type | Expansion module | |||
Connected sensors | LA2-W500CAN | LA2-W500CAP | LA2-W500CA | |
response time | Single output: 600us/1ms/10ms/100 ms/500 ms switching Multiple outputs: 2 ms/3 ms/11 ms/100 ms/500 ms switching | |||
Mutual interference reduction function | Setting of different frequencies, up to 2 units*¹ | |||
Timer | OFF / turn-on delay / turn-off delay / single | |||
Electric power source | Supply Voltage | 15 to 30 VDC Contained Ripple (P-P) 10%, Class2 or LPS | ||
Current consumption | 65 mA or less at 24V (without load) 120 mA or less at 12V (without load) | |||
Input/Output | Control output | 4 outputs (NPN/PNP; normally open/normally closed, switchable) 50 mA or less for main module; 20 mA or less for expansion module Residual voltage 2V or less | ||
External input | 4 inputs; short-circuit current NPN: 1 mA or less; PNP: 2 mA or less | |||
External Input Functions | Tuning/stopping transmitter Switching | |||
Protection Circuitry | Power supply inverse connection protection, Power surge protection, output overcurrent protection, output surge protection, output reverse connection protection | |||
Connecting Expansion Modules | Up to 3 expansion modules can be connected to 1 main module | |||
Vibration resistance | Ambient light | Incandescent:10000Ix or less Sunlight:20000lx or less | ||
Environmental temperature | -20 to +50°C (no freezing) | |||
Relative humidity | 35 to 85% RH (no freezing) | |||
Shock value | 1,000 m/s² 6 times in each direction of X, Y, Z | |||
Vibration resistance | 10 to 55 Hz double amplitude 1.5 mm 2 hours in each direction of X, Y, Z | |||
Material | Polycarbonate | |||
Weight | Approx. 150g |
*1. The response time is delayed by approximately 20% for different frequencies set under the Anti-Jamming Function menu.
Quick Helpline