Home > Products > Colour Sensors > Multi-function color sensors > Multi-function color sensors > LA3-W Series > Specs

Colour Sensors

Multi-function color sensors- LA3-W Series

Sensor Head

Type Relay type
Model NPN/PNP LA3-W70CA LA3-WS300CA LA3-W500CA
Detection distance 30–70 mm 30–300 mm 30–500 mm
Minimum spot diameter Approx. 1.6 x 2.9 mm at 45 mm Adjustable light spot
Approx. Φ2±0.2 mm (at 90 mm)
Approx. Φ5±0.5 mm (at 200 mm)
Approx. Φ7±0.8 mm (at 300 mm)
Adjustable light spot
Approx. Φ3.5±0.2 mm (at 100 mm)
Approx. Φ9±0.5 mm (at 250 mm)
Approx. Φ18±1 mm (at 500 mm)
Light source White LED
Reduced mutual interference frequency Setting of different frequencies, max. 2 units*1
Timer OFF / ON-Delay / OFF-Delay / One-Shot
Protection circuit Power reverse connection protection, power surge protection, output overcurrent protection,
output surge protection, output reverse connection protection
Housing rating IP65/IP67 (IEC60529)
Ambient light Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less
Ambient temperature -20 to +50 °C (no freezing)
Relative humidity 35 to 85 % RH (no condensation)
Shock resistance 1,000 m/s² , 6 times in each of the X, Y, and Z directions
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Cable length (cm) 190±5 (Plug-in M8)
Material Zinc alloy
Weight Approx. 150 g
Notes:
* 1 The response time is delayed by approximately 20% for different frequencies set under the anti-interference function menu.
*2 OUT2 multiplexes the white line with the external input, and when the white line is set to output, there is no external input.

Controller

Type Main module Expansion module
Model LU-N11 LU-N12
Connected sensors LA3-W70* LA3-WS300* LA3-W500* LA3-W70* LA3-WS300* LA3-W500*
Response time 1 Spot Mode, 1 Output:
Switchable between
0.6 ms / 1.1 ms / 11 ms / 100 ms / 500 ms
2 Spot Differential Mode, 1 Output:
Switchable between
0.6 ms / 2.6 ms / 21 ms / 200 ms / 1 s
2 Spot Matching Mode, 1 Output:
Switchable between
0.5 ms / 2.1 ms / 21 ms / 200 ms / 1 s
1 Spot Mode, Multiple Outputs:
Switchable between
2 ns / 3 ms / 11 ms / 100 ms / 500 ms
2 Spot Matching Mode, Multiple Outputs:
Switchable between
2 ms / 4 ms / 21 ms / 200 ms / 1 s
1 Output:
Switchable between
0.6 ms / 1.1 ms / 11 ms / 100 ms / 500 ms
Multiple Outputs:
Switchable between
2 ms / 3 ms / 11 ms / 100 ms / 500 ms
1 Spot Mode, 1 Output:
Switchable between
0.6 ms / 1.1 ms / 11 ms / 100 ms / 500 ms
2 Spot Differential Mode, 1 Output:
Switchable between
0.6 ms / 2.6 ms / 21 ms / 200 ms / 1 s
2 Spot Matching Mode, 1 Output:
Switchable between
0.5 ms / 2.1 ms / 21 ms / 200 ms / 1 s
1 Spot Mode, Multiple Outputs:
Switchable between
2 ns / 3 ms / 11 ms / 100 ms / 500 ms
2 Spot Matching Mode, Multiple Outputs:
Switchable between
2 ms / 4 ms / 21 ms / 200 ms / 1 s
1 Output:
Switchable between
0.6 ms / 1.1 ms / 11 ms / 100 ms / 500 ms
Multiple Outputs:
Switchable between
2 ms / 3 ms / 11 ms / 100 ms / 500 ms
Mutual interference reduction function Setting of different frequencies, up to 2 units*1
Timer OFF / ON-Delay / OFF-Delay / One-Shot
Power
supply
Power voltage 15 to 30 VDC with ripple (P-P) 10%, Class 2 or LPS
Current
consumption
80 mA or less at 24 V (without load)
70 mA or less at 30 V (without load)
Input/
Output
Control output Up to 4 outputs (NPN/PNP; normally open/normally closed, switchable)
Main module: 50 mA or less, Expansion module: 20 mA or less
Residual voltage: 2 V or less
External input Up to 4 inputs; Short-circuit current: NPN: 1 mA or less, PNP: 2 mA or less
Analog output Up to 1 analog output (available only on the main module)
Switchable between current output / voltage output
Current output: 4 to 20 mA, maximum load resistance 350 Ω
Voltage output: 0 to 10 V, output impedance 100 Ω
External input function Tune/Stop transmit, switchable
Protection circuit Power reverse connection protection, power surge protection, output overcurrent protection,
output surge protection, output reverse connection protection
Connection of expansion modules Up to 3 expansion modules can be connected to 1 main module
Environmental
resistance
Ambient temperature -10 to +50 °C (no freezing)
Relative humidity 35 to 85% RH (no condensation)
Shock resistance 1,000 m/s² , 6 times in each of the X, Y, and Z directions
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material Polycarbonate
Weight Approx. 140 g
* 1 The response time is delayed by approximately 20% for different frequencies set under the Anti-Interference Function menu.

Service Support

Quick Helpline

+86-755-83330055

Home > Products > Colour Sensors > Multi-function color sensors > Multi-function color sensors
×

Login

Forgot your password/Username?Register