High-Precision Medium-Long Range Laser Displacement Sensor - LM2-H Series

Cable type, Analog

Model	NPN/PNP Analog voltage/current	LM2-H030SAV	LM2-H030AV	LM2-H050AV	LM2-H085AV	LM2-H120AV	LM2-H200AV	LM2-H250AV
Type		Diffuse reflective
		Short-range type		Medium-range type			Long-range type
Detection distance		30 mm	30 mm	50 mm	85 mm	120 mm	200 mm	250 mm
Range		±5 mm	±4 mm	±10 mm	±20 mm	±60 mm	±105 mm	±150 mm
Light sensor		Linear image sensor CMOS
Spot size	Close range	ø150 μm	ø150 μm	250*700 μm	250*700 μm	ø500 μm	ø600 μm	ø600 μm
	Reference distance	ø120 μm	ø120 μm	150*350 μm	150*150 μm	ø250 μm	ø400 μm	ø400 μm
	Long range	ø120 μm	ø120 μm	100*100 μm	250*500 μm	ø500 μm	ø600 μm	ø700 μm
Light source		655 nm red laser, 1 mW max.
Laser class		IEC/JIS (class2); FDA (class Ⅱ)
Linear accuracy		±0,1 % F.S.12
Repeatability		1 μm12	2 μm12	5 μm12	10 μm12	40 μm12	50 μm12	70 μm12
Sampling period		1 time/1 ms; 16 times/8.5 ms; 64 times/32.5 ms max.					1 time/1.5 ms; 16 times/13 ms; 64 times/49 ms max.
Temperature drift		±0,08 % F.S./℃
Analog output		0-20 mA; 4-20 mA; 0-5 V; 0-10 V; ±5 V; ±10 V
Switching output		NPN or PNP open collector output, Q1/Q2: Max 100 mA/DC 30 V, residual voltage 1.8 V
External input		NPN contactless input, valid: 0 to +1.2 VDC, input impedance: approx. 10 kΩ
Power voltage		12 to 30 VDC ±10 % including fluctuations of 10 % (p-p)
Current consumption		35 mA or less (at 24 VDC), 60 mA or less (at 12 VDC)
Protection class		IP67
Ambient illumination		Incandescent lamp: 3,000 lux or less
Operating ambient temperature		-10 to +40 °C (no freezing)
Operating ambient humidity		35 to 85 % RH (no condensation)
Power cord		2 m highly flexible drag chain type cable
Material		Enclosure: Zinc alloy, Indicator cover: PC, Lens: Glass, Buttons: ABS, Cable: PVC
Weight		Approx. 150 g (including cable)

*Note:
1. This is data from SENPUM measurements of standard targets (white diffuse objects).
2. The test data at an average number of 128 samples (High Resolution Mode) is used as the standard, and the repeatability accuracy varies in different modes.
3. The measurement time for optimal test values consists of two parts: sampling time and adjustment calculation time.

Cable type, RS-485

Model	NPN/PNP RS-485	LM2-H030ST	LM2-H030T	LM2-H050T	LM2-H085T	LM2-H120T	LM2-H200T	LM2-H250T
Type		Diffuse reflective
		Short-range type		Medium-range type			Long-range type
Detection distance		30 mm	30 mm	50 mm	85 mm	120 mm	200 mm	250 mm
Range		±5 mm	±4 mm	±10 mm	±20 mm	±60 mm	±105 mm	±150 mm
Light sensor		Linear image sensor CMOS
Spot size	Close range	ø150 μm	ø150 μm	250*700 μm	250*700 μm	ø500 μm	ø600 μm	ø600 μm
	Reference distance	ø120 μm	ø120 μm	150*350 μm	150*150 μm	ø250 μm	ø400 μm	ø400 μm
	Long range	ø120 μm	ø120 μm	100*100 μm	250*500 μm	ø500 μm	ø600 μm	ø700 μm
Light source		655 nm red laser, 1 mW max.
Laser class		IEC/JIS (class2); FDA (class Ⅱ)
Linear accuracy		±0,1 % F.S.12
Repeatability		1 μm12	2 μm12	5 μm12	10 μm12	40 μm12	50 μm12	70 μm12
Sampling period		1 time/1 ms; 16 times/8.5 ms; 64 times/32.5 ms max.					1 time/1.5 ms; 16 times/13 ms; 64 times/49 ms max.
Temperature drift		±0,08 % F.S./℃
Analog output		0-20 mA; 4-20 mA; 0-5 V; 0-10 V; ±5 V; ±10 V
Switching output		NPN or PNP open collector output, Q1/Q2: Max 100 mA/DC 30 V, residual voltage 1.8 V
External input		NPN contactless input, valid: 0 to +1.2 VDC, input impedance: approx. 10 kΩ
Power voltage		12 to 30 VDC ±10 % including fluctuations of 10 % (p-p)
Current consumption		35 mA or less (at 24 VDC), 60 mA or less (at 12 VDC)
Protection class		IP67
Ambient illumination		Incandescent lamp: 3,000 lux or less
Operating ambient temperature		-10 to +40 °C (no freezing)
Operating ambient humidity		35 to 85 % RH (no condensation)
Power cord		2 m highly flexible drag chain type cable
Material		Enclosure: Zinc alloy, Indicator cover: PC, Lens: Glass, Buttons: ABS, Cable: PVC
Weight		Approx. 150 g (including cable)

*Note:
1. This is data from SENPUM measurements of standard targets (white diffuse objects).
2. The test data at an average number of 128 samples (High Resolution Mode) is used as the standard, and the repeatability accuracy varies in different modes.
3. The measurement time for optimal test values consists of two parts: sampling time and adjustment calculation time.

Relay type, Analog

Model	NPN/PNP Analog voltage/current	LM2-H030SCAAV	LM2-H030CAAV	LM2-H050CAAV	LM2-H085CAAV	LM2-H120CAAV	LM2-H200CAAV	LM2-H250CAAV
Type		Diffuse reflective
		Short-range type		Medium-range type			Long-range type
Detection distance		30 mm	30 mm	50 mm	85 mm	120 mm	200 mm	250 mm
Range		±5 mm	±4 mm	±10 mm	±20 mm	±60 mm	±105 mm	±150 mm
Light sensor		Linear image sensor CMOS
Spot size	Close range	ø150 μm	ø150 μm	250*700 μm	250*700 μm	ø500 μm	ø600 μm	ø600 μm
	Reference distance	ø120 μm	ø120 μm	150*350 μm	150*150 μm	ø250 μm	ø400 μm	ø400 μm
	Long range	ø120 μm	ø120 μm	100*100 μm	250*500 μm	ø500 μm	ø600 μm	ø700 μm
Light source		655 nm red laser, 1 mW max.
Laser class		IEC/JIS (class2); FDA (class Ⅱ)
Linear accuracy		±0,1 % F.S.12
Repeatability		1 μm12	2 μm12	5 μm12	10 μm12	40 μm12	50 μm12	70 μm12
Sampling period		1 time/1 ms; 16 times/8.5 ms; 64 times/32.5 ms max.					1 time/1.5 ms; 16 times/13 ms; 64 times/49 ms max.
Temperature drift		±0,08 % F.S./℃
Analog output		0-20 mA; 4-20 mA; 0-5 V; 0-10 V; ±5 V; ±10 V
Switching output		NPN or PNP open collector output, Q1/Q2: Max 100 mA/DC 30 V, residual voltage 1.8 V
External input		NPN contactless input, valid: 0 to +1.2 VDC, input impedance: approx. 10 kΩ
Power voltage		12 to 30 VDC ±10 % including fluctuations of 10 % (p-p)
Current consumption		35 mA or less (at 24 VDC), 60 mA or less (at 12 VDC)
Protection class		IP67
Ambient illumination		Incandescent lamp: 3,000 lux or less
Operating ambient temperature		-10 to +40 °C (no freezing)
Operating ambient humidity		35 to 85 % RH (no condensation)
Power cord		15 cm highly flexible drag chain type cable M8 6PIN
Material		Enclosure: Zinc alloy, Indicator cover: PC, Lens: Glass, Buttons: ABS, Cable: PVC
Weight		Approx. 150 g (including cable)

*Note:
1. This is data from SENPUM measurements of standard targets (white diffuse objects).
2. The test data at an average number of 128 samples (High Resolution Mode) is used as the standard, and the repeatability accuracy varies in different modes.
3. The measurement time for optimal test values consists of two parts: sampling time and adjustment calculation time.

Relay type, RS-485

Model	NPN/PNP RS-485	LM2-H030SCAT	LM2-H030CAT	LM2-H050CAT	LM2-H085CAT	LM2-H120CAT	LM2-H200CAT	LM2-H250CAT
Type		Diffuse reflective
		Short-range type		Medium-range type			Long-range type
Detection distance		30 mm	30 mm	50 mm	85 mm	120 mm	200 mm	250 mm
Range		±5 mm	±4 mm	±10 mm	±20 mm	±60 mm	±105 mm	±150 mm
Light sensor		Linear image sensor CMOS
Spot size	Close range	ø150 μm	ø150 μm	250*700 μm	250*700 μm	ø500 μm	ø600 μm	ø600 μm
	Reference distance	ø120 μm	ø120 μm	150*350 μm	150*150 μm	ø250 μm	ø400 μm	ø400 μm
	Long range	ø120 μm	ø120 μm	100*100 μm	250*500 μm	ø500 μm	ø600 μm	ø700 μm
Light source		655 nm red laser, 1 mW max.
Laser class		IEC/JIS (class2); FDA (class Ⅱ)
Linear accuracy		±0,1 % F.S.12
Repeatability		1 μm12	2 μm12	5 μm12	10 μm12	40 μm12	50 μm12	70 μm12
Sampling period		1 time/1 ms; 16 times/8.5 ms; 64 times/32.5 ms max.					1 time/1.5 ms; 16 times/13 ms; 64 times/49 ms max.
Temperature drift		±0,08 % F.S./℃
Analog output		0-20 mA; 4-20 mA; 0-5 V; 0-10 V; ±5 V; ±10 V
Switching output		NPN or PNP open collector output, Q1/Q2: Max 100 mA/DC 30 V, residual voltage 1.8 V
External input		NPN contactless input, valid: 0 to +1.2 VDC, input impedance: approx. 10 kΩ
Power voltage		12 to 30 VDC ±10 % including fluctuations of 10 % (p-p)
Current consumption		35 mA or less (at 24 VDC), 60 mA or less (at 12 VDC)
Protection class		IP67
Ambient illumination		Incandescent lamp: 3,000 lux or less
Operating ambient temperature		-10 to +40 °C (no freezing)
Operating ambient humidity		35 to 85 % RH (no condensation)
Power cord		15 cm highly flexible drag chain type cable M8 6PIN
Material		Enclosure: Zinc alloy, Indicator cover: PC, Lens: Glass, Buttons: ABS, Cable: PVC
Weight		Approx. 150 g (including cable)

*Note:
1. This is data from SENPUM measurements of standard targets (white diffuse objects).
2. The test data at an average number of 128 samples (High Resolution Mode) is used as the standard, and the repeatability accuracy varies in different modes.
3. The measurement time for optimal test values consists of two parts: sampling time and adjustment calculation time.

Laser Displacement Sensors

High-Precision Medium-Long Range Type- LM2-H Series

Cable type, Analog

Cable type, RS-485

Relay type, Analog

Relay type, RS-485

Download

Service

Recommended Series

You may also be interested in the following informationView more>>

Download

Service Support

+86-755-83330055

Recommended Content

Laser Displacement Sensors series

Laser Displacement Sensors

File waiting to be downloaded ×

Laser Displacement Sensors

High-Precision Medium-Long Range Type- LM2-H Series

Cable type, Analog

Cable type, RS-485

Relay type, Analog

Relay type, RS-485

Download

Service

Recommended Series

You may also be interested in the following informationView more>>

Download

Service Support

+86-755-83330055

Recommended Content

Laser Displacement Sensors series

Laser Displacement Sensors

Login

File waiting to be downloaded ×